to F11 (in 1/3 stop increments): F1.8, F2.0, F2.2, F2.5, F2.8, F3.2,
F3.5, F4.0, F4.5, F5.0, F5.6, F6.3, F7.1, F8.0, F9.0, F10 and F11
Auto, force on, force off, red-eye reduction, slow sync
16:9 2MP images in 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10min, and 30
min time intervals and combines into MPEG-4 video clip with 10fps
Internal: 80MBExternal: micro-SD/ micro-SDHC/ micro-SDXC ; UHS -1 up to 64 GB**Using 128GB size memory cards may result in a read/write error or other compatibility issues.
Lithium rechargeable battery (3.7v, 1130 mAh, 4.2Wh), weight 23gBattery life: 200+ pictures, 2+ hoursBattery charge time: 2.5 hours using 5V/1A wall charger
Microphone: StereoSpeaker: Mono
PC: Windows XP / Vista / 7 / 8 / 10 or laterMAC: OS 10.4 and up
/ French / Spanish / German / Italian / Russian / Portuguese / Brazil
Portuguese / Dutch / Turkish / Polish / Hungarian / Romanian / Czech /
Bulgarian / Croatian / Slovak / Slovenian / Greek / Swedish / Norwegian /
Finnish / Danish/ Arabic / Indonesia / Malay / Thai / Japanese / Korean
/ S. Chinese / T. Chinese
Version 2.0 with Standard Micro-B USB
CE, ROHS, FCC, WEEE
Inner camera with underwater housing: 200ft/60mInner camera without housing: 60ft/18m
8.3 ounces (234 grams) Inner camera with battery and memory card24.4 oz. (691g) UW housing and inner camera16.1 oz. (457g) UW housing only
Inner camera: 2.6H x 4.6W x 1.4D (67 x 116 x 36 mm)Inner camera with housing: 4.0H x 5.9W x 3.0D (102mm x 149mm x 81mm)
Underwater: 33 degrees F to 110 degrees F (5 degrees C to 44 degrees C)Land: 0 degrees F to 120 degrees F (-18 degrees C to 50 degrees C)
4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only
is a measure of a light source's ability to show object colors
"realistically" or "naturally" compared to daylight, which has a CRI of
100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested in-air (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to
displace heat. The metal light head at full power will reach temperature
of about 140F (60C) degrees within a few minutes, which may cause
burning if touched. A thermal sensor will automatically dim the light if
internal temperatures reaches 150F (65C) degrees. Immediately turn off
light if any parts of the light become hot to the touch.