Home > Safety > Whistles >

Dive Alert Plus v2 for use with ScubaPro Air 2, Tusa Duo-Air, Atomic SS1, Sherwood Gemini & Zeagle Octo-Z
Dive Alert Plus v2 for use with ScubaPro Air 2, Tusa Duo-Air, Atomic SS1, Sherwood Gemini & Zeagle Octo-Z  *Buy at DIVESEEKERS.com 888-SCUBA-47


 
Alternate Views


Our Price: $89.95
Manufacturer Dive Alert
Stock Status Usually Ships in 24 to 48 Hours


Availability:: In Stock
Product Code: ID-DV3
Qty:

Description
 
Dive Alert Plus v2 for use with ScubaPro Air 2, Tusa Duo-Air, Atomic SS1, Sherwood Gemini & Zeagle Octo-Z
Features
DiveAlertPLUS is a specially designed, small, light weight pneumatic signaling device that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator. Installation is easy and takes only a moment.

DiveAlertPLUS uses a small amount of air from your SCUBA tank to make a piercingly loud sound in air or water. People have been able to hear a DiveAlertPLUS one mile away from a diver in need above water. In conditions where visibility is limited, a DiveAlertPLUS can be a life saver. Underwater you can sound for attention quickly with a squeeze of the device.

NO MODS REQUIRED

DiveAlertPLUS does not require any modification to your equipment, and it does not interfere with the normal operation of your equipment. The DiveAlertPLUS comes in three different models to accommodate different connectors: DV1, DV2, and DV3.

EASY TO USE DESIGN

Once the tank is turned on and the DiveAlertPLUS connected, squeeze the DiveAlertPLUS softly underwater for a subsurface signal. Or squeeze it firmly on the surface for a loud surface signal blast. Check that DiveAlertPLUS is installed correctly and functioning properly before every dive. Also be careful not to point DiveAlertPLUS toward yourself or toward anyone who is in close proximity to you when you activate the surface signal (itís really loud!).

HOW IT WORKS

The DiveAlertPLUS uses chrome-plated brass couplings to attach to your power inflator. Squeezing the device engages the actuator valve stem causing a small amount of air to flutter a stainless steel diaphragm, emitting a piercingly loud sound from the injection-molded thermoplastic body. The subsurface / underwater signal is produced by a percussion "buzzing" noise made by a piston hitting a stainless steel diaphragm much like a drum.

Specifications

Body and Internal Elements:

Injection-molded Thermoplastic

Stainless Steel

Couplings

Chrome-plated Brass

One-Year Limited Warranty

Ideations design, Inc., warrants DiveAlertPLUS to be free from defects in materials and workmanship for one year from the date of purchase from an authorized DiveAlertPLUS dealer. If any functional defects appear in a DiveAlertPLUS unit within the one-year warranty period, the unit will be either repaired or replaced at the option of Ideations Design, Inc.

Maintenance

After each use, DiveAlertPLUS should be rinsed with fresh water. This is especially important after use in chlorinated swimming pools and in other water having corrosive substances. Additionally, it is highly recommended that you blow the water out of DiveAlertPLUS before storing. This can be done by pressurizing and activating both the surface and subsurface signaling elements. We recommend that you cup your hand over the surface signaling element to muffle the loud noise.


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Good job! December 29, 2015
Reviewer: Bruce from Torrance, CA United States  
Prompt and responsive.  Helpful staff with good follow-up as well.

Was this review helpful to you?


Browse for more products in the same category as this item:

Safety > Whistles
U/W Tools > Noise Makers
Safety > Horns