• TransPlac harness: choice of sizes
• Aircell: choice of Dive Rite EXP wings
  
• Weight Pockets: choice of Dive Rite QB 16-lb or 32-lb
• Crotch Strap: Choice of 1-inch, 1.5-inch, or 2-inch
• Single Tank Cam Straps (2): w/ stainless steel cam buckles
• Stabilizing Plates
  

Inspired by a remote dive exploration in Japan where divers had to hike their heavy gear through dry portions of cave to get to the underwater sumps. The explorers also needed the versatility to switch their gear configuration from backmount to sidemount to single tanks (flexibility that a traditional hard backplate does not offer). Designed like a mountaineer’s backpack, the TransPac disperses weight across the hips and back, minimizing shoulder strain. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. A soft backplate accommodates sidemount diving, yet gives appropriate support for single tanks, double tanks or rebreathers. Slots in the backplate fit standard 36-inch cam straps (included) for single tank diving. The modular design allows for customization using an assortment of pockets and accessories, depending on the needs and desires of the individual diver. The TransPac is lightweight and flattens easily into a suitcase for travel. The TransPac is designed to be used with any wing in the Dive Rite line. Made in the U.S.A.

• Soft backplate is constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance.
• Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waistband.
• Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Sizes XS, Small and Medium have one 2-inch D-ring per shoulder strap due to space limitations.
• Six 1-inch D-rings on each side of the harness provide attachment points for light canisters, pony bottles, lift bags and other equipment.
• Grommet mounting holes slide over bolt kit when diving doubles and help diver set trim.
• Marine Grade 316 stainless steel hardware is used throughout including: (6) 1-inch D-rings, (2) bent D-rings on each shoulder strap (Note: Sizes XS, Small and Medium have one 2-inch D-ring per shoulder strap) and (2) waist D-rings, pivot rings, belt buckle, cam strap buckles, and side plates.
• Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution.
• Acetyl resin engineered plastic quick release buckles on the shoulders for easy doff and don.
• One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin® 1-inch quick release buckle are used for a chest strap.
• Stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance. Pre-drilled to attach optional Tek D-rings for use with stage bottles and side mounting.
• Crotch strap D-ring for attaching optional 1-inch, 1.5-inch or 2-inch crotch strap.
• Includes (2), 2-inch nylon webbing cam straps with stainless steel buckles for mounting harness to single tanks. Cam straps are standard 36-inches in length.
• XS:4 lbs 4 oz (1.92kg), Sm:4 lbs 4 oz (1.95kg), Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg), XLT:5 lbs (2.29kg), XXL:4.93lb (2.23kg), XXLT:5lbs 2 oz (2.32kg)
• Made in U.S.A.