Five low pressure ports on the 3100 Regulator gives divers ultimate flexibility in hose routing. This is especially beneficial to the backmount technical diver where the need for a streamlined reg configuration can cause undue stress on the hoses.
Our 5th LP port is located on the top of the turret and we designed it with safety and convenience in mind. The port is slightly convex and slotted on each side to accommodate an 11/16 wrench for securing the turret while loosening the LP hose. This makes it easy to change the hose without concern of loosening the turret. Please click on TIPS to the left for suggestions on hose lengths when using the 5th port.
of tests.
A pneumatically balanced design delivers gas at a constant pressure so work of breathing remains effortless independent of depth or tank pressure. A diaphragm first stage means regulator parts are not exposed to the environment, protecting it from contaminates and debris. An ergonomic venturi lever is easy to adjust even with thick gloves.
An optional environmental kit protects the reg in cold weather and harsh environments. It comes standard with a 300-bar DIN connector and an additional yoke adapter. Using oxygen compatible materials and assembly processes that are today industry standard, the 3001 is suitable for oxygen use at gas pressures up to 3000 psi. **
Note: The 3100 Regulator comes with Dive Rite's standard limited lifetime warranty and free service kits for life through an authorized Dive Rite dealer as long as the regulator is serviced every two years or one hundred dives.