 |
 |
 |
|
Algorithm & Safety
Adaptive algorithm (ZH-l8 ADT MB PMG)
- This exclusive UWATEC algorithm increases safety and optimizes
bottom time by constantly adjusting the decompression plan during the
dive when risk factors like, fast ascents or the potential for
formation of micro bubbles are detected.
Microbubble Suppression Technology
- Select one of six micro bubble suppression levels to minimize
critical micro bubble formation from single or repetitive exposures.
2 Nitrox Mix capabilities
- Allows the programming of up to two nitrox mixes prior to the dive
and calculates the decompression status foreseeing the switch to the
other gases. It accounts only for the actual switches made by the diver
and constantly updates its decompression calculations in case of missed
or delayed switches.
- Nitrox compatibility 21 - 100%
- Customize your MoD and ppo2 max at the time of o2 mix setting
(in 1% increments). In case of decompression tanks, set the depth
switch based on your personal preferences.
Functions & Display
Bookmark Function during Dive
- Highlight specific moments and add comments after downloading the dive via Smart TRAK.
Gauge Mode to 400 ft
- Operates as technical depth gauge to 400 feet. Includes a stopwatch function.
Customize Audible Warnings
- Audible warnings can be turned on and off based on personal preferences.
Dive Planner
- Allows planning of decompression dives accounting for two gases.
Allows entering any surface interval in case of repetitive diving for
more powerful planning.
Safety Stop Timer
- User activated, the duration can be set between 1 and 5 minutes (default of 3 minutes).
- User Adjustable Illuminated Display
Adjustable backlight duration (2 - 12 seconds) to optimize battery life.
Data Transfer & Memory
100 Hours of Profile Storage at 4-second Sampling Rate
- Ensures you will never lose a dive log; high sampling rate preserves all details about the dives.
99 Dive On-Board Logbook
- Quick access to basic logbook information directly on the dive computer.
- Infrared Technology
| Algorithm: |
ZHL8 ADT MB PMG |
| Number of Tissues: |
8 |
| Half times: |
5 to 640min |
| MB levels: |
YES + Management |
| PMG - Predictive Multi Gas: |
Yes- 2 Gas |
| True Remaining Bottom Time calculation: |
No |
| 300bar compatibility: |
No |
| Ascent speed: |
Variable |
| Stop watch function: |
Yes- 1 to 5min |
| On/Off: |
Automatic/ Manual |
| Buttons / Wet contacts: |
Push buttons/ Wet contacts |
| Max depth: |
393 ft (120 meters) |
| Working Temperature (°C): |
-50F to +122F (-10°-50°) |
| Max altitude: |
13123 feet (4000m) |
| Altitude settings: |
Automatic + Altimeter |
| Calibration: |
Salt and/or Fresh |
| Memory – Logbook: |
Yes |
| Memory - History: |
Yes |
| Memory capacity - Sampling: |
25 hours- 4sec |
| Alarm - Depth: |
Yes |
| Alarm - Time: |
Yes |
| Personal settings: |
Yes |
| Silent option: |
Yes |
| Desaturation reset: |
Yes |
| Adaptive algorithm: |
Yes |
| Workload integration: |
No |
| Nitrox: |
Yes 100% - (2 gas) |
| Dive planner: |
Deco plan for 2 gas |
| ppO2 setting: |
Yes- 1.0 - 1.6 |
| Gas integration, data transmission and number of transmitters: |
No- 0 |
| Weight: |
157g |
| Total dive time: |
Yes |
| Backlight: |
Yes- 2 to 12 sec |
| Watch functions: |
Yes |
| Stop watch function: |
Yes- gauge mode |
| Gauge mode: |
Yes |
| Average depth reset: |
Yes- gauge mode |
| PC interface: |
Yes- Infra-red |
| Screen protector: |
Yes |
| Current depth: |
Yes |
| Max Depth: |
yes |
| Dive time: |
Yes |
| Ascent speed display: |
Yes |
| No deco time display: |
Yes |
| Saturation level: |
Yes |
| 1st deco stop depth: |
Yes |
| Deco stop time: |
Yes |
| Safety stop: |
Yes |
| Ascent: |
Yes |
| Ambient temperature: |
Yes |
| Mid tank pressure warning: |
No |
| Oxygen toxicity/Central Nervous System (CNS) loading warning: |
CNS 02 |
| Multi gas computer: |
Yes- 2 gas |
| Surface time: |
Yes |
| Max Depth: |
Yes |
| Dive number: |
Yes |
| Time to fly: |
Yes |
| Battery alarm: |
Yes |
| Battery replacement: |
User replaceable |
|
|
|
 |
|
 |
|
|
|
